Process of painting two open crabs, with a capabality of of 10 t, for double-girder EOT crane kits, with a 18.35 m span and a lifting height of 37 m
Customer: Budimex, S.A.
Location of the installation: Warsaw (Poland)
It works with an open-crab type hoist, (model GHG-3T, M8 classification). Equipped with command post with ergonomic seats, displays on the seat, two SIEMENS automatons and two complete scanners.
Gantry crane with open crab to manipulate gates, whose main feature is the capability to pull at 45º, as shown in the photograph.
The open crab is equipped with lashes and must be lashed if it is going to be used to pull at 45º. Despite having 20 tonne lifting capacity, when pulling at 45º this is limited to 10 tonnes via an end switch that sends the signal to the overload device.
The pulley and several other lifting elements have been modified to allow the cable to work in that position.
The characteristicsof this facilityare:
Product Type: Bridge crane with open winch and 8m3 grab
Capacity: 10,5t
Span: 17m
Lifting height: 15m
Client: Cementownia Warta / Cement Warta
Installation Location: Trębaczew, region Łódź, Poland
Sector: Cement (RSU)
Interest information: Incorporates anti-sway system, cell weighing system by compensating pulley bolt. Plant capacity 138,600 t / year.
