Manufacturing process of double girder gantry crane with end carriage 40/16 t capacity, 17.9 m span and 14.5 m HOL
Client : Flowserve
Instalation place : Madrid
The hoist motion is performed by a GHF double girder hoist with end carriage, which will work with a 40 t spreader beam. The auxiliary hoist is a GHE single girder hoist in M6 working group both hoist and cross travel motion.
Manufacturing process of two double girder bridge crane KIT, 90/15 t capacity open winch and 19.7 m span.
Client : Constructora Queiroz Galvao
Instalation place : El Salvador
This bridge crane has an auxiliary hoist. A single girder hoist GHF 15 t with 34 m HOL. Cranes will be commanded from a cabin, master/slave, and will include anti-sway system.
Manufacturing process for a double girder bridge crane with 95/15 tns open winch capacity, 15,6 M span and 17 M of lifting hight.
Client : VOITH HYDRO GmbH & CO
Installation place : Germany
The crane allow a distance of 17 m lifting elevation, and it go with bolt load cell with display, as shown in he photos.
It also has platform in the carriage and small balconies in gearbox motors.
The auxiliary hoist is GHF single girder with 26.3 m travelling cable go with it. Sigue leyendo