Archivo de la etiqueta: polipasto

Low headroom single girder electric hoists

The low headroom configuratión is the standard for the best use of under-beam space in single girder cranes.

Wheels can be flat or angled to suit different type of bottom flanges and running profiles, to improve behavior and increase duration.

_MG_0823 _MG_0809 _MG_0814

Sesión de fotos del polipasto GHE de altura reducida, con una capacidad de elevación de 10t.

La configuración de polipasto monoviga de altura reducida es el estándar para tener el mejor aprovechamiento bajo viga en la grúas monorraíles.

Las ruedas pueden ser planas o con ángulo para adaptarse a todo tipo de platabandas y perfiles, con objeto de un mejor comportamiento y mayor duración.

Normal headroom single girder electric hoists

The normal headroom single girder configuration, is the traditional solution in single girder cranes when space under beam is not important. This configuration is suitable for 1/1 and 2/2 reevings hoists.

Another relevant use is in cranes with load transfer between halls.

Wheels can be flat or angled to suit different type of bottom flanges and running profiles, to improve behavior and increase duration.

_MG_0854 _MG_0803 Sigue leyendo →

GHD13 hoist – Polipasto GHD13

In the section of photo: the new GHD13 low headroom hoists, with a lifting capacity of 10t.

The modular design of the new hoist, can be used as much as possible of the structure in the assembly of different compositions of the hoist, such as the arrangement of the rope falls (4/1, 2/1, 4/2, etc. ), or the length of the drum, even in a second motor installation.

_MG_0750 _MG_0751 _MG_0778_R

Sigue leyendo →